Active Directory Or Ldap Server Summary - ZyXEL Communications ISG50-ISDN User Manual

Integrated service gateway

Hide thumbs Also See for ISG50-ISDN:

Table of Contents

Chapter 48 AAA Server

A bind DN is used to authenticate with an LDAP/AD server. For example a bind DN of

cn=ISG50Admin allows the ISG50 to log into the LDAP/AD server using the user name of

ISG50Admin. The bind DN is used in conjunction with a bind password. When a bind DN is not

specified, the ISG50 will try to log in as an anonymous user. If the bind password is incorrect, the

Finding Out More

Section 7.5.3 on page 118

radius server.

Section 7.6 on page 120

accounts based on groups.

48.2 Active Directory or LDAP Server Summary

Use the Active Directory or LDAP screen to manage the list of AD or LDAP servers the ISG50 can

use in authenticating users.

Click Configuration > Object > AAA Server > Active Directory (or LDAP) to display the

Active Directory (or LDAP) screen.

Figure 423 Configuration > Object > AAA Server > Active Directory (or LDAP)

The following table describes the labels in this screen.

Table 249 Configuration > Object > AAA Server > Active Directory (or LDAP)

Server Address

for an example of how to set up user authentication using a

for an example of how to use a RADIUS server to authenticate user

Click this to create a new entry.

Double-click an entry or select it and click Edit to open a screen where you can

modify the entry's settings.

To remove an entry, select it and click Remove. The ISG50 confirms you want to

remove it before doing so.

Select an entry and click Object References to open a screen that shows which

settings use the entry. See

This field displays the index number.

This is the name of the AD or LDAP server entry.

This is the address of the AD or LDAP server.

This specifies a directory. For example,

Section 12.3.2 on page 246

o=ZyXEL, c=US

for an example.

ISG50 User's Guide