ZyXEL Communications ISG50-ISDN User Manual page 188

Chapter 9 Dashboard
Table 26 Dashboard (continued)
LABEL
Current Date/
Time
VPN Status
DHCP Table
Current Login
User
Number of
Login Users
Boot Status
Interface Status
Summary
Name
Status
Zone
IP Addr/
Netmask
IP Assignment
188
DESCRIPTION
This field displays the current date and time in the ISG50. The format is yyyy-mm-dd
hh:mm:ss.
Click this to look at the VPN tunnels that are currently established. See
page 190.
Click this to look at the IP addresses currently assigned to the ISG50's DHCP clients and
the IP addresses reserved for specific MAC addresses. See
This field displays the user name used to log in to the current session, the amount of
reauthentication time remaining, and the amount of lease time remaining. See
44 on page 599.
This field displays the number of users currently logged in to the ISG50. Click the icon to
pop-open a list of the users who are currently logged in to the ISG50. See
on page 193.
This field displays details about the ISG50's startup state.
OK - The ISG50 started up successfully.
Firmware update OK - A firmware update was successful.
Problematic configuration after firmware update - The application of the
configuration failed after a firmware upgrade.
System default configuration - The ISG50 successfully applied the system default
configuration. This occurs when the ISG50 starts for the first time or you intentionally
reset the ISG50 to the system default settings.
Fallback to lastgood configuration - The ISG50 was unable to apply the startup-
config.conf configuration file and fell back to the lastgood.conf configuration file.
Fallback to system default configuration - The ISG50 was unable to apply the
lastgood.conf configuration file and fell back to the system default configuration file
(system-default.conf).
Booting in progress - The ISG50 is still applying the system configuration.
If an Ethernet interface does not have any physical ports associated with it, its entry is
displayed in light gray text. Click the Detail icon to go to a (more detailed) summary
screen of interface statistics.
This field displays the name of each interface.
This field displays the current status of each interface. The possible values depend on
what type of interface it is.
For Ethernet interfaces:
Inactive - The Ethernet interface is disabled.
Down - The Ethernet interface does not have any physical ports associated with it or the
Ethernet interface is enabled but not connected.
Speed / Duplex - The Ethernet interface is enabled and connected. This field displays
the port speed and duplex setting (Full or Half).
For cellular (3G) interfaces, see
appear.
This field displays the zone to which the interface is currently assigned.
This field displays the current IP address and subnet mask assigned to the interface. If
the IP address is 0.0.0.0, the interface is disabled or did not receive an IP address and
subnet mask via DHCP.
This shows whether the interface gets an IP address automatically (DHCP) or has a fixed
IP address (Static).
Section 9.2.5 on page
Section 10.10 on page 210
Section 9.2.1 on
192.
Chapter
Section 9.2.6
for the status that can
ISG50 User's Guide