ZyXEL Communications ISG50-ISDN User Manual page 258

Chapter 12 Interfaces
Table 71 Configuration > Network > Interface > Cellular > Add (continued)
LABEL
Network
Selection
Budget Setup
Enable Budget
Control
Time Budget
Data Budget
Reset time and
data budget
counters on
Reset time and
data budget
counters
Actions when
over budget
Log
New 3G
connection
Current 3G
connection
258
DESCRIPTION
Home network is the network to which you are originally subscribed.
Select Home to have the 3G device connect only to the home network. If the home
network is down, the ISG50's 3G Internet connection is also unavailable.
Select Auto (Default) to allow the 3G device to connect to a network to which you are
not subscribed when necessary, for example when the home network is down or
another 3G base station's signal is stronger. This is recommended if you need
continuous Internet connectivity. If you select this, you may be charged using the rate
of a different network.
Select this to set a monthly limit for the user account of the installed 3G card. You can
set a limit on the total traffic and/or call time. The ISG50 takes the actions you specified
when a limit is exceeded during the month.
Select this and specify the amount of time (in hours) that the 3G connection can be
used within one month. If you change the value after you configure and enable budget
control, the ISG50 resets the statistics.
Select this and specify how much downstream and/or upstream data (in Mega bytes)
can be transmitted via the 3G connection within one month.
Select Download to set a limit on the downstream traffic (from the ISP to the ISG50).
Select Upload to set a limit on the upstream traffic (from the ISG50 to the ISP).
Select Download/Upload to set a limit on the total traffic in both directions.
If you change the value after you configure and enable budget control, the ISG50 resets
the statistics.
Select the date on which the ISG50 resets the budget every month. If the date you
selected is not available in a month, such as 30th or 31th, the ISG50 resets the budget
on the last day of the month.
This button is available only when you enable budget control in this screen.
Click this button to reset the time and data budgets immediately. The count starts over
with the 3G connection's full configured monthly time and data budgets. This does not
affect the normal monthly budget restart; so if you configured the time and data budget
counters to reset on the second day of the month and you use this button on the first,
the time and data budget counters will still reset on the second.
Specify the actions the ISG50 takes when the time or data limit is exceeded.
Select None to not create a log, Log to create a log, or Log-alert to create an alert
log. If you select Log or Log-alert you can also select recurring every to have the
ISG50 send a log or alert for this event periodically. Specify how often (from 1 to 65535
minutes) to send the log or alert.
Select Allow to permit new 3G connections or Disallow to drop/block new 3G
connections.
Select Keep to maintain an existing 3G connection or Drop to disconnect it. You cannot
set New 3G connection to Allow and Current 3G connection to Drop at the same
time.
If you set New 3G connection to Disallow and Current 3G connection to Keep, the
ISG50 allows you to transmit data using the current connection, but you cannot build a
new connection if the existing connection is disconnected.
ISG50 User's Guide