The Advanced Setup Screen; Figure 47 Wireless Lan > Advanced Setup; Table 25 Wireless Lan > Mac Filter - ZyXEL Communications P-870HW-51a v2 User Manual

The following table describes the labels in this screen.
Table 25 Wireless LAN > MAC Filter
LABEL
Active MAC
Filter
MAC Restrict
Mode
MAC
Address
Add Entries
Set
MAC
Address
Remove
Apply
Remove

7.8 The Advanced Setup Screen

To configure advanced wireless settings, click Network > Wireless LAN > Advanced Setup.
The screen appears as shown.
Figure 47 Wireless LAN > Advanced Setup
P-870HW-51a v2 User's Guide
DESCRIPTION
Select the check box to enable MAC address filtering.
Define the filter action for the list of MAC addresses in the table below.
Select Allow to permit access to the ZyXEL Device, MAC addresses not listed will be
denied access to the ZyXEL Device.
Select Deny to block access to the ZyXEL Device, MAC addresses not listed will be
allowed to access the ZyXEL Device
Enter the MAC addresses of the wireless devices that are allowed or denied access to
the ZyXEL Device in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Click this to save and insert the entry to the table below.
This is the index number of the MAC address.
This is the MAC addresses of the wireless devices that are allowed or denied access to
the ZyXEL Device.
Select the entry(ies) that you want to delete in the Remove column, then click the
Remove button.
Click this to save your changes back to the ZyXEL Device.
Click this to delete the selected entry(ies).
Chapter 7 Wireless LAN
87