Using A Custom Program; Custom Scrolling Message - Stairmaster FreeClimber Systems Owner's Manual

•
•
•
FREECLIMBER 4600/4400 Pl/CL CONSOLE
taller or shorter. Press
and [CLEAR] to move one column to the
4. When all of the intervals are correctly programmed, press
[0- 4600 PTfCl] or [YES - 4400 PTfCl] to save the profile. Press
[STOP - 4600 PTfCl] or [STARTfSTOP - 4400 PTfCl] to abort the
programming process without saving the profile.

Using a Custom Program

1. Press [- DECREASE] and the exercise program keypad button you
assigned to the custom
2. Enter your body weight, the intensity level and the workout time
in response to the prompts.

CUSTOM SCROLLING MESSAGE

The message that scrolls across the text bar during the ATTRACT mode can be
replaced with a message of your choice. The console accepts messages up to
128 characters in length, including spaces. To program your message:
1. Encode your message using the character codes
2. While the console is
[6], [0], [7], [ENTER] .
3.
Enter the two-digit code for each letter of your
letter will appear in the text bar as you press the second digit of
each code. Do not press [ENTER] between the code numbers.
4. For example, to program the message
[+ ARROW], [7], [6], [0], [7], [ENTER]
[2], [8], [1], [3], [1], [9], [2], [9], [1], [5], [1], [0], [1], [9], [2], [9], [1], [0], [1],
[6], [3], [1], [2], [4], [ENTER]
scrolling. The console
5. If you make a mistake while entering the codes, press [CLEAR] to
erase the last character entered.
Page 24
[ENTER] to move one column to the right
left.
program.
listed in
in the ATTRACT mode, press [+ INCREASE], [7],
message.
"EXERCISE IS
. Then press [1], [5], [3], [4], [1], [5],
. At that point, your message will begin
is again in the ATTRACT mode.
Table 3.
The
FUN", press