Upper Handles (4600 Pt/Cl); Side Handrails (4600 Pt/Cl) - Stairmaster FreeClimber Systems Owner's Manual

•
•
PARTS REMOVAL AND REPLACEMENT
UPPER HANDLES (4600 PI/CL)
1. Disconnect the left and right contact heart rate cables from the back of
the console.
2. Remove the two mounting screws from the top and bottom shield (see
Figure 19) and remove the shields from the upper handle
3. Remove the four handrail adapter screws from the upper handle
assembly.
4. Remove the upper handle assembly from the
heart rate cables are threaded through the handrail adapter. Remove
the handrail adapter from the contact heart rate cables.
5. Reverse the removal procedures to
assembly.
SIDE HANDRAILS (4600 PI/CL)
1. Disconnect the left and right
contact heart rate cables
from the back of the console.
2. Remove the two mounting
screws from the top and bottom
shield (see Figure 19) and remove
the shields from the upper handle
assembly.
3. Remove the four handrail
adapter screws from the upper
handle assembly.
4. Remove the upper handle assembly from the
machine. The contact heart rate cables are
threaded through the
handrail adapter from the contact heart
Set the upper handle assembly aside.
machine.
install the new upper handle
Extrusion
18019
handrai I adapter. Remove the
rate cables.
assembly.
The contact
Page 59