Installation Instructions; Figure 3: Level Adjusting End Caps - Stairmaster FreeClimber Systems Owner's Manual

•
•
•

INSTALLATION INSTRUCTIONS

Assemble your machine before use. Machines shipped outside the United States
need to be uncrated before they can be assembled; refer to the
Instructions" included with your machine for the details.
1. Remove all shipping material from your machine once it
2. Make sure the machine is level before you use
four rubber end caps (see Figure 3) are designed to compensate for
uneven floors. Each face of the caps
caps to stabilize the machine.
Rotate cap to

Figure 3: Level Adjusting End Caps

3. Open the box you removed from the pedals. The box contains either an
external power supply (4600/4400/4200 PT only) or a wall-pack battery
charger (4600/4400 CL only). The battery charger is only used to
recharge a low battery.
Page 6
it for the first
is a different thickness. Twist the
adjust
Level Adj
End Cop
(24329)
"Uncrating
is in place.
time. The
usting