•
•
PARTS REMOVAL AND REPLACEMENT
PEDAL
1.
Remove the snap ring and flat washer from the leveling arm pin and the
pedal shaft (see Figure 20).
TO REDUCE THE RISK OF EYE INJURY, WEAR EYE
PROTECTION WHEN REMOVING SNAP
2.
Slide the pedal off the shaft.
3.
Clean the pedal shaft and leveling arm pin with a dry
the pedal shaft and the leveling arm pin with a thin coat of multi-
purpose
grease.
4.
Reverse the procedures to reinstall the pedal.
LEVELING ARM
1.
Remove the peda
I.
2.
Remove the bottom cover.
3.
Remove the snap ring that secures the leveling arm to the leveling arm
shaft (see Figure
18).
TO REDUCE THE RISK OF EYE INJURY, WEAR EYE
PROTECTION WHEN REMOVING SNAP RINGS.
4.
Slide or gently tap the leveling arm off the shaft.
5.
Clean the shaft and the pin with a cloth dampened with 30W motor oil
before reassembly.
6.
Reverse the removal instructions to reinstall the leveling arm.
Page 56
WARNING
RINGS.
cloth.
WARNING
Lubricate