Stairmaster FreeClimber Systems Owner's Manual page 20

•
•
•
INSTALLATION INSTRUCTIONS
6. Check to be sure that the input AC power rating marked on the power
supply matches the available power. If it does not, obtain the matching
power supply from
proceeding any further.
TO REDUCE THE RISK OF ELECTRICAL SHOCK AND FIRE AND TO
PREVENT SEVERE DAMAGE TO THE
PROVED FOR USE WITH THIS EQUIPMENT. IN ADDITION
YOUR MACHINE MUST BE PROPERLY
7. Connect the AC power cord to the AC wa ll outlet. Refer to the
"Grounding Instructions"
accept a three-prong plug.
Watch the console.
8.
message and then display a simulated EKG signal. The 4200 PT console
should run through a self test and then display a moving line in the
upper LCD window. If the console does
and then plug it back
contact our Customer Service Department. Refer to the Appendix for the
appropriate phone number.
9. If you have a
4600/4400
operation. Once you step on the pedals, the console should produce an
audible sound and display a simulated EKG in the display area. If it does
not, connect the battery charger to the connector on the lower right
side. If the console still does not power up contact our Customer Service
Department. Refer to the Appendix for the appropriate phone number.
10. The ATTRACT mode tells you the machine is ready to
4400 PT console displays a simulated EKG signal and the 4200 PT
ICl
displays a moving line in the upper LCD window when the console is in
the ATTRACT mode.
PageS
Sports/Medical Products, Inc. before
WARNING
MACHINE, USE ONLY THE POWER SUPPLY AP-
GROUNDED.
section if the AC wall outlet does not
The 4600/4400 PT should scroll a copyright
not, unplug the power supply
in. If the console still does not power up correctly,
CL, step on the pedals to check for proper
,
use. The 4600/