•
•
•
4.
If you have a 4600/4400 CL, skip to step
4200 PT, connect the DC cable of the power supply to the connector
near the bottom of the left side cover (see Figure 4).
Figure 4: DC Power Connector
5.
Place the power supply on the floor near an AC wall outlet. To reduce
the hazard of electrical shock, place the power supply
away from the machine and away from exposure to perspiration. You
should not place your power supply on a carpet because
heat.
INSTALLATION INSTRUCTIONS
9.
If you have a 4600/44001
power
supp
ly here
in
a location
it
may over
Page 7