Using A Custom Program; Custom Scrolling Message - Stairmaster FreeClimber 4600 PT Owner's Manual

FREECLIMBER 4600/4400 PT/CL CONSOLE
taller or shorter. Press [ENTER] to move one column to the right
and [CLEAR] to move one column to the left.
4. When all of the intervals are correctly programmed, press
[0- 4600 PT/CL] or [YES - 4400 PT/CL] to save the profile. Press
[STOP - 4600 PT/CL] or [START/STOP - 4400 PT/CL] to abort the
programming process without saving the profile.

Using a Custom Program

1. Press [- DECREASE] and the exercise program keypad button you
assigned to the custom program.
2. Enter your body weight, the intensity level and the workout time
in response to the prompts.

CUSTOM SCROLLING MESSAGE

The message that scrolls across the text bar during the ATTRACT mode can be
replaced with a message of your choice. The console accepts messages up to
128 characters in length, including spaces. To program your message:
1. Encode your message using the character codes listed in Table 3.
2. While the console is in the ATTRACT mode, press [+ INCREASE], [7],
[6], [0], [7], [ENTER].
3. Enter the two-digit code for each letter of your message. The
letter will appear in the text bar as you press the second digit of
each code. Do not press [ENTER] between the code numbers.
4. For example, to program the message "EXERCISE IS FUN", press
[+ ARROW], [7], [6], [0], [7], [ENTER]. Then press [1], [5], [3], [4], [1], [5],
[2], [8], [1], [3], [1], [9], [2], [9], [1], [5], [1], [0], [1], [9], [2], [9], [1], [0], [1],
[6], [3], [1], [2], [4], [ENTER]. At that point, your message will begin
scrolling. The console is again in the ATTRACT mode.
5. If you make a mistake while entering the codes, press [CLEAR] to
erase the last character entered.
Page 24