Speed Test; Software Revision Level Test - Stairmaster FreeClimber Systems Owner's Manual

•
•
•
4600/4400 PTICL CONSOLE DIAGNOSTIC TESTS
keypad or the function keypad will light an LED within the outline on the
display that corresponds to that button's position on the
3. Firmly press each button.
you pushed does not light
be replaced .
4. Press [CLEAR] to test the LED and then end the test 10 seconds later.

Speed Test

Use this test to verify the electronic speed control routines of the
will need to briefly exercise on the machine for this test.
1. From the DIAGNOSTIC
The console will be set at a certain speed
2.
RPMs, is displayed on the text bar as
lights will light up on the left side of the display.
3. Begin exercising. As you move the pedal
alternately show the actual RPM and the target RPM
4. Press [CLEAR] to return to the DIAGNOSTIC

Software Revision Level Test

This test allows you to check the version number of the software installed in the
console.
1. From the DIAGNOSTIC mode, press [4] to start the test.
2. The software version number will be scrolled across the text
The console automatically returns to the DIAGNOSTIC mode.
Page 42
If the LED corresponding to the button
up, the keypad is bad and the console should
mode, press [3] to start the test.
. The alternator speed, in
"Target" and a single column of
arms, the text bar will
mode.
console.
console. You
.
bar.