Specify The Number Of Overwrite Passes - Oce ColorWave 650 User Manual

Specify the number of overwrite passes

Specify the number of overwrite passes
Introduction
The e-shredding function allows you to erase jobs from the system. This prevents unau-
thorized people from accessing the deleted jobs. You can manually enter the required
number of overwrite passes. Therefore, the setting 'E-shredding algorithm' must be set
to 'Custom'. The more passes you define, the more reliable the erasing of jobs is. However,
more passes take more time. You can enter any number from 1 to 35. The factory default
is 3.
Before you begin
Make sure that 'Custom' is selected as the e-shredding algorithm.
How to specify the number of overwrite passes
Go to 'Configuration' - 'Connectivity' - 'E-shredding' - 'E-shredding custom number of
1.
passes'.
Click .
2.
Enter the required number of overwrite passes.
3.
128 Chapter 4 - Configure the printing system