General Functions; Switching The Hi-Fi System On And Off; Adjusting The Brightness Of The Display; Changing The Colour Of The Display Lighting - Grundig Oslo CDS 6690 USB User Manual

GENERAL FUNCTIONS

Switching the hi-fi system on and off

1 Switch the hi-fi system on from standby mode by
pressing »ON/OFF«.
– The last input source used is automatically se-
lected.
2
Press »ON/OFF« to switch the hi-fi system to stand-by.
– Display: »GOOD BYE« briefly, then the current time
and day of the week.
GOOD BYE
Note:
The only way to disconnect the hi-fi system from
7
the mains supply is to pull the plug.
Adjusting the brightness of the
display
1 Change the overall brightness of the display back
light using »BRIGHTNESS« on the remote control
in three levels (bright, medium, off).
– The auto dimmer adapts the brightness of the dis-
play to the brightness of the surroundings.
Note
Minimum power consumption in standby mode is
7
only achieved if the backlighting in the display is
switched off.
Changing the colour of the display
lighting
1
Change the colour of the display back light by press-
ing »COLOR« on the remote control. There are
eight options.

Selecting the input source

1 Select the input source by pressing »FUNCTION«.
– Display: »FM TUNER«, »MW TUNER«, »CD«, »SD
CARD«, »USB« or »AUX«.
40
ENGLISH
I2 : 24
I2 : 24
CD
__________________________________________

Adjusting the volume

1
Adjust the volume with
– Display: briefly »VOL« (»MIN«, »I« to »39«, and
above this »MAX«).

Muting

With this function you can switch the hi-fi speakers to
and from mute mode.
1 Press »MUTE« on the remote control to switch the
sound on and off.
– Display: »MUTE« when mute is on.

Selecting sound effects

You can select from the sound settings USER, CLASSIC,
POP, JAZZ and ROCK. The basic setting is USER.
1
Select the sound setting by pressing »DSC«.
– Display: »
N
N
f

Setting the equaliser

The USER sound setting allows you to make your own
personal equaliser settings.
1 When the device is on, press »DSC« until »
appears in the display.
2
Press »DSC« again for approximately 2 seconds.
– Display: »BASS 0«.
N
N
USER
3 Press »DSC« to choose the setting (BASS or TREBLE).
– Display: »BASS 0« or »TRE 0«.
Note:
If you do not press any button within five seconds,
7
the hi-fi system will automatically quit this mode.
»– VOLUME +
«.
MUTE
X
«, » «, » C«, » V« or »
V
P02
PROG
JAZZ
!
FANTASY
BASS 0
Y
«.
«
N
N