Setting The Time; Resetting The Hi-Fi System - Grundig Oslo CDS 6690 USB User Manual

Hifi micro system
Table of Contents

Advertisement

SETTINGS
_______________________________________________________________
5
To store more stations, repeat steps
Note:
If the hi-fi is disconnected from the mains for a long
7
time, all the preset stations are deleted.

Setting the time

The following settings may only be performed in stand-
by mode.
1
To set the 12-hour format, briefly press
RAND./
TIME«.
– Display: briefly »I2HR«, then the current time, for
example »PM MON I2:02« (»PM« for the second
half of the day).
2
To set the 24-hour format, press
TIME« again.
– Display: briefly »24HR«, then the current time, for
example »MON 0:03«.
3
To set the time, press and hold down
RAND./
TIME«.
– Display: the hours flash.
4
»UP TUNING/ADJ/ALBUM
Set the hours using
DOWN« and press »PROG./RAND./TIME« to
confirm.
– Display: the minutes flash.
5
Set the minutes using
ALBUM
DOWN« and press
TIME« to confirm.
– Display: the day of the week flashes.
1
to 4.
»PROG./
PM
I2 : 02
MON
»PROG./RAND./
»PROG./
: 03
0
MON
I2 :
03
MON
»UP TUNING/ADJ/
»PROG./RAND./
6
Set the day of the week using
ADJ/ALBUM
DOWN« and press
RAND./TIME« to confirm.
– Display: »CT ON« flashes.
7
Set the RDS time synchronisation with
»UP TUNING/ADJ/ALBUM
confirm with
»PROG./RAND./
Notes:
You must reset the time after a power failure or
7
when the mains plug is pulled out.
Some RDS stations transmit an RDS time signal. If
7
the selected RDS programme transmits this time in-
formation, the time on the system is automatically
updated. This takes about five minutes.

Resetting the hi-fi system

This function enables you to reset the hi-fi in the event
of a mal function. Stored radio stations are retained but
the clock and alarm time are deleted.
1
With the device on, press the »RESET« button on the
bottom of the hi-fi system using an implement such as
a paper clip.
»UP TUNING/
»PROG./
I2 : 24
CT ON
DOWN« and
TIME«.
ENGLISH
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents