Job Assembly; Build Job - Xerox CopyCentre C123 Quick Reference Manual

Date and Time
Prints the date and time that the copy job started on each of the copies. The [Set
Numbering - Date and Time] screen is displayed. Select [On] to enable the feature.
Serial Number
Prints the serial number of the machine on the copies. The [Set Numbering - Serial
Number] screen displays. Select [On] to enable the feature.

Job Assembly

This section describes how to make settings on the [Build Job] feature. For more
information on the feature, refer to the following.
Build Job – page 69
1.
Press the <All Services> button
on the control panel.
2.
Select [Copy] on the touch
screen.
3.
Select the [Job Assembly] tab.

Build Job

This feature allows you to make copies with different settings for individual or groups of
pages but still run the job as a single job. For example, if a job consists of some sections
with text and some with photos, you can select the appropriate settings to be applied
to each section and then print them at one time. You can also print only one set of the
job prior to printing out the whole quantity. This will allow you to check the print result
and adjust the settings if necessary.
1.
Select [Build Job] on the [Job
Assembly] screen.
2.
Select the required option.
3.
Select [Save].
Off
Disables the feature.
On
Enables the feature.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 Quick Reference Guide
Job Assembly
69