Displaying Vlan Configuration; Configuring A Port-Based Vlan; Port-Based Vlan Configuration Task List; Configuring The Link Type Of An Ethernet Port - H3C S5100-SI Operation Manual

To do...
Disable the VLAN
interface
Enable the VLAN
Interface
The operation of enabling/disabling a VLAN's VLAN interface does not influence the physical status of
the Ethernet ports belonging to this VLAN.

Displaying VLAN Configuration

To do...
Display the VLAN interface
information
Display the VLAN information

Configuring a Port-Based VLAN

Port-Based VLAN Configuration Task List

Complete these tasks to configure a port-based VLAN:

Configuring the Link Type of an Ethernet Port

Assigning an Ethernet Port to a VLAN
Configuring the Default VLAN for a Port
Configuring the Link Type of an Ethernet Port
Follow these steps to configure the link type of an Ethernet port:
To do...
Enter system view
Use the command...
shutdown
undo shutdown
Use the command...
display interface Vlan-interface
[ vlan-id ]
display vlan [ vlan-id [ to vlan-id ] | all |
dynamic | static ]
Task
Use the command...
system-view
2-3
Remarks
Optional
By default, the VLAN interface is enabled.
In this case, the VLAN interface's status is
determined by the status of the ports in the
VLAN, that is, if all ports of the VLAN are
down, the VLAN interface is down
(disabled); if one or more ports of the VLAN
are up, the VLAN interface is up (enabled).
If you disable the VLAN interface, the VLAN
interface will always be down, regardless of
the status of the ports in the VLAN.
Available in any
view.
Remarks
Optional
Required
Optional
Remarks
—
Remarks