Setting Select Memory Channels; D Setting In Scan Screen; D Setting In Memory List Screen; D Erasing The Select Scan Setting - Icom IC-7800 Instruction Manual

■ Setting select memory channels

D Setting in scan screen

D Setting in memory list screen

D Erasing the select scan setting

q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Select memory mode.
e Push [F-5•SCAN] to select the scan screen.
r Select the desired memory channel to set as a se-
lect memory channel.
• [Y]/[Z] keys and direct keypad selections can be used.
t Push [F-3•SELECT] several times to set the mem-
ory channel as a select memory ★1, ★2, ★3 or
not.
y Repeat steps r to t to program another memory
channel as a select memory channel, if desired.
u Push [EXIT/SET] to exit the scan screen.
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Push [F-4•MEMORY] to select memory list screen.
e Rotate the main dial while pushing [F-1•ROLL] or
[F-2•SET] to select the desired memory channel.
• [Y]/[Z] keys and direct keypad selections can be used.
r Push [F-3•SELECT] several times to set the mem-
ory channel as a select memory ★1, ★2, ★3 or
not.
t Repeat steps e to r to program another memory
channel as a select memory channel, if desired.
y Push [EXIT/SET] to exit the memory list screen.
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Push [F-4•MEMORY] to select memory list screen,
or push [F-5•SCAN] to select scan screen.
e Hold down [F-3•SELECT] for 1 second to display
memory select all clear window.
r Push one of the following keys to clear all select
scan setting.
[F-1•★1]
: Clears all ★1 setting.
[F-2•★2]
: Clears all ★2 setting.
[F-3•★3]
: Clears all ★3 setting.
[F-4•★1,2,3] : Clears all select setting.
t Push [EXIT/SET] to exit the memory list screen.
9-7
9
SCANS