Icom IC-7800 Instruction Manual page 221
Hide thumbs
Also See for IC-7800:
- Service manual addendum (555 pages) ,
- Instruction manual (216 pages) ,
- Service manual (216 pages)
Table of Contents
Advertisement
UPDATING THE FIRMWARE
!3 After the firmware loading is completed, the trans-
ceiver starts the update automatically and the dia-
log as at left is displayed.
R WARNING! NEVER turn the IC-7800 power
OFF at this stage.
The transceiver firmware will be damaged.
!4 When the dialog disappears, the precaution as at
left is displayed.
!5 Read the precaution carefully, and then push
[F-6•OK].
• Return to CF/USB-Memory set menu.
!6 Push [POWER] to turn the IC-7800 power OFF,
then ON again.
!7 Depending on the updating, one to four dialog as at
left appears in sequence.
R WARNING! NEVER turn the IC-7800 power
OFF at this stage.
The transceiver firmware will be damaged.
!8 After the dialog disappears, the firmware updat-
ing is completed and normal operation screen ap-
pears.
16-5
16
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-7800 and is the answer not in the manual?
Questions and answers
My 7800 automatically goes into Split mode when transmitting on the "Main" side of the radio. It transfers the Main frequency to the "Sub" frequency, goes into split mode and transmits on the Sub side of the radio. What Causes that and how do I cancel that?