D Rtty Memory Transmission; D Automatic Transmission/Reception Setting - Icom IC-7800 Instruction Manual

4
RECEIVE AND TRANSMIT

D RTTY memory transmission

[F-1•RT1]–[F-4•RT4]
[F-1•RT5]–[F-4•RT8]

D Automatic transmission/reception setting

[F-6•AUTO TX]
NOTE: The transceiver always functions as the
"AUTO TX/RX" setting when no keyboard is con-
nected.
[EXIT/SET] [F-7•1–4/5–8]
[F-7•RT1..RT8]
[EXIT/SET]
Pre-set characters can be sent using the RTTY memory.
Contents of the memory are set using the edit menu.
q During RTTY mode operation, push [F-3•DECODE]
to select RTTY decode screen.
w Push [F-4•TX MEM] to select RTTY memory
screen.
e Push [F-7•1–4/5–8] to select memory bank
then push one of the function keys ([F-1•RT1] to
[F-4•RT4] or [F-1•RT5] to [F-4•RT8]).
• When no keyboard is connected, the selected memory
contents will be transmitted immediately.
• When a keyboard is connected, the memory contents
will be transmitted immediately when function key is
pushed, or transmitted after [F12] on the connected
keyboard is pushed, depending on auto transmission/
reception setting (see below).
• The transmission date, time, reception date and/or time
may be displayed in RX contents screen, depending on
setting.
✔
For your convenience
When an external keypad is connected, one of RT1 to
RT4 RTTY memory contents can be transmitted while
the RTTY decoder screen is selected in RTTY mode.
See pages 2-6, 2-10 and 12-20 for details.
q During RTTY mode operation, push [F-3•DECODE]
to select RTTY decode screen.
w Push [F-4•TX MEM] to select RTTY memory
screen, then push [F-6•EDIT] to select RTTY mem-
ory edit screen.
• RTTY memory contents of the Channel 1 (RT1) is se-
lected.
e Push [F-7•RT1..RT8] several times to select the de-
sired RTTY memory.
r Push [F-6•AUTO TX] several times to select the de-
sired condition as follow.
• AUTO TX/RX : Automatically transmits the se-
• AUTO TX
• AUTO RX
• No indication : Push [F12] on the keyboard to
t Push [EXIT/SET] to exit RTTY memory edit condi-
tion.
4-16
lected memory and returns to re-
ceive after the transmission.
: Automatically transmits the se-
lected memory. To return to re-
ceive, push [F12] on the key-
board.
: Push [F12] on the keyboard to
transmit the selected memory. Au-
tomatically returns to receive after
the transmission.
transmit the selected memory and
push [F12] again to return to re-
ceive.