Icom IC-7800 Instruction Manual page 128

7
VOICE RECORDER FUNCTIONS
■ Voice set mode (Continued)
Turn the File Split function ON or OFF.
Turn the PTT Automatic Recording function ON or
OFF.
Set the Skip time for forwarding or rewinding while
playing back the QSO audio.
3, 5, 10 and 30 seconds are selectable.
• OFF: The audio is continuously recorded into the
file, even if you switch between transmit and
receive or the squelch status changes be-
tween open and closed.
• ON: While recording, and if you switch between
transmit and receive, or the squelch status
changes between open and closed, a new file
is automatically created in the same folder,
and the audio is saved into the new one.
• OFF: The recording does not start even if a signal is
transmitted.
• ON: The recording automatically starts when a sig-
nal is transmitted.
The recording will continue when:
• A signal is transmitted again within 10 seconds
after the last transmission.
• A signal is received within 10 seconds after the
last transmission, the received audio is also re-
corded.
- A signal is received within 10 seconds after the
last reception.
• The squelch is open in the FM modes.
The recording will stop when:
• The frequency or operating mode is changed.
• The operating method (V/M, M-CH, Band Stack-
ing Register, and so on) is changed.
• 10 minutes has past after the last transmission
while the squelch is open in the SSB, CW, RTTY,
PSK or AM modes.
7-14