Recording A Message For Transmit; D Recording; D Confirming A Message For Transmit - Icom IC-7800 Instruction Manual

■ Recording a message for transmit

D Recording

[MIC] [F-1•Y] [F-2•Z] [F-4•REC]
Appears

D Confirming a message for transmit

[F-1•Y] [F-2•Z] [F-3•PLAY]
Adjust [MIC] control so that this
indicator reads within 100%.
VOICE RECORDER FUNCTIONS
To transmit a message using the Voice Recorder , re-
cord the desired message in advance as described
below.
The IC-7800 has digital voice memories for transmis-
sion, up to 4 memories and you can record message
in length of up to 99 seconds.
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Push [F-2•VOICE] to display the Voice Recorder
menu.
e Push [F-2•MIC REC] to select the voice mic. record
screen.
r Push [F-1•Y] or [F-2•Z] to select the desired mem-
ory channel.
t Hold down [F-4•REC] for 1 second to start record-
ing.
• "
" indicator appears.
• Speak into the microphone without holding down [PTT].
• Previously recorded contents are cleared.
• Audio output from the internal speaker is automatically
muted.
y While speaking into the microphone with your nor-
mal voice level, adjust the [MIC] control so that the
[MIC-REC LEVEL] indicator reads within 100%.
u Push [F-4•REC] momentarily to stop recording.
• The recording is terminated automatically when the re-
maining time becomes 0 second.
i Push [EXIT/SET] twice to exit the Voice Recorder
screen.
q Perform the steps q to e as "D Recording"
above.
w Push [F-1•Y] or [F-2•Z] to select the desired mem-
ory channel.
e Push [F-3•PLAY] to playback the recorded con-
tents.
• "
" indicator appears.
r Push [F-3•PLAY] again to stop playback.
• Playback is terminated automatically when all of the re-
corded contents in the channel are played.
t Push [EXIT/SET] twice to exit the Voice Recorder
screen.
7-9
7