Delete The Jobs - Oce 31x5e Maintenance Manual

Delete the jobs

Introduction
If there are problems with the job transfer, an excessive load can be placed on
the DAC. You can delete the jobs to regain space.
If you delete the print jobs, all the print jobs will be deleted.
If you delete the scan jobs, all the scan jobs, which are not yet transferred to
the DAC, will be deleted.
Before you begin
Enter the key operator system.
1.
Attention:
You can also use the Océ System Configuration to delete one or more
Note:
jobs.
Illustration
[79] Delete the scan jobs
[79] Delete the scan jobs
Deleting the jobs
Activate the 'Print settings' section.
1.
Open the 'DAC control' card.
2.
Press the 'Delete jobs' function key to select 'Print jobs' or 'Scan jobs' .
3.
Press the start key
4.
Correcting Errors
You cannot reverse the delete actions.
to confirm.
129