TEW-753DAP User's Guide
System configuration
System Management and Default Settings
If you have a brand new out of box TEW-753DAP or if you just reset
TEW-753DAP to factory defaults by pressing and holding reset button
for over 10 seconds, your TEW-753DAP has following settings:
Management IP :
Administrator name :
Administrator password :
Default SSID :
Default SSID passphrase :
Log-in System Management for the First Time
Power on your TEW-753DAP by connecting PoE cable to a PoE
1
switch or plug-in the power adapter comes with the package. The
power LED will turned on.
© Copyright 2013 TRENDnet. All rights reserved.
192.168.10.100
admin
admin
(printed on pre-set label)
(printed on pre-set label)
2
Search for available wireless connections in your computer's
network settings. The default SSID of the TEW-735AP is shown on
the preset label. The default wireless security settings are set to
WPA2 and the passphrase is printed on the preset label and device
label.
Or,
Connect a network cable from your computer to the TEW-753DAP
network port.
System Configuration
9