Omniback Ii User Interface For Windows Nt - HP StorageWorks 8000 - NAS User Manual

OmniBack II User Interface for Windows NT

162 Integrating with Network Backup Applications
Note For a complete discussion on backup over the network, see the
HP OpenView OmniBack II Administrator's Guide .
Before you use OmniBack II to back up data from the NAS server, you must
enable OmniBack II for Windows NT to back up remote systems.
1 Select Start > Settings > Control Panel. Double-click Services.
2 Locate the OmniBack II Inet Service, then click Stop.
3 Click Startup, then click This Account. Select a valid network administrator
account. Create a password, confirm it, then click OK.
4 Click Start to restart the OmniBack II Inet service.
Figure 1 OmniBack II Inet Service