Omniback Ii User Interface For Windows Nt - HP StorageWorks 8000 - NAS User Manual

Integrating with Network Backup Applications

OmniBack II User Interface for Windows NT

Note:
OmniBack II Administrator's Guide
Before you use OmniBack II to back up data from the NAS server, you must
enable OmniBack II for Windows NT to back up remote systems.
1. Select Start > Settings > Control Panel. Double-click Services.
2. Locate the OmniBack II Inet Service, then click Stop.
3. Click Startup, then click This Account. Select a valid network administrator
4. Click Start to restart the OmniBack II Inet service.
Figure 20: OmniBack II Inet Service
188
For a complete discussion on backup over the network, see the
account. Create a password, confirm it, then click OK.
.
HP OpenView