Ethernet Events; Enabling Ethernet Events - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

3

Ethernet events

An Ethernet event occurs when the Ethernet link between the Management Server and the
managed device is lost. You can configure the application to enable events when the Ethernet
connection is lost.

Enabling Ethernet events

The Options dialog box enables you to configure the Management application to generate an
Ethernet event after a device is offline for a specific period of time.
To enable Ethernet events, complete the following steps.
1. Select Server > Options.
FIGURE 31
2. Select Ethernet Event in the Category list.
3. Select the Enable Ethernet Event check box.
4. Enter the Ethernet time out value (10 to 120 minutes).
5. Click Apply or OK to save your work.
70
The Options dialog box displays
Options dialog box (Ethernet Event option)
(Figure 31).
DCFM Professional Plus User Manual
53-1001774-01