Faxing
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the home screen, navigate to:
Fax > enter the fax number > Options
4
Adjust the fax darkness, and then touch Fax It.
Viewing a fax log
1
Type the scanner IP address in the address field of your Web browser.
If you do not know the IP address or host name of the scanner, then you can:
•
View the information on the scanner control panel home screen, or in the TCP/IP section under the
Networks/Ports menu.
•
Print a network setup page or menu settings page and locate the information in the TCP/IP section.
2
Click Settings > Reports > Fax Job Log or Fax Call Log.
Blocking junk faxes
1
Type the scanner IP address in the address field of your Web browser.
If you do not know the IP address or host name of the scanner, then you can:
•
View the information on the scanner control panel home screen, or in the TCP/IP section under the
Networks/Ports menu.
•
Print a network setup page or menu settings page and locate the information in the TCP/IP section.
2
Click Settings > Fax Settings > Analog Fax Setup > Block No Name Fax.
Notes:
•
This option blocks all incoming faxes that have a private caller ID or no fax station name.
•
In the Banned Fax List field, enter the phone numbers or fax station names of specific fax callers you want to
block.
Canceling an outgoing fax
Canceling a fax while the original documents are still scanning
•
When using the ADF, touch Cancel Job while Scanning... appears.
•
When using the scanner glass, touch Cancel Job while Scanning... appears or while Scan the Next Page /
Finish the Job appears.
137