The Scanner Accounting Tab - Oce PlotWave 750 Operation Manual

The Scanner accounting tab

Introduction
The [Scanner accounting] tab in the Océ Express WebTools allows you to unlock the scanner for
copying or scan-to-file. Valid accounting information is required to unlock the scanner.
By default [Scanner accounting] is disabled.
NOTE
Before you can edit a setting or a settings group, you must be logged on as a key operator or
power user.
Illustration
[15] Scanner accounting tab
Enable [Scanner accounting]
Procedure
1. Click [Preferences] - [System settings] - [Logging and accounting].
2.
Change the value of [Force entry of accounting data for copy and scan jobs] to 'On'. When 'On', it
will only be possible to start a copy or scan-to-file job when valid accounting data is entered.
The following [Scanner accounting] settings are now valid:
Setting
[Scanner locking: at
startup]
[Scanner locking: at
panel time-out]
[Scanner unlocking:
location]
Description
When 'Enabled', the scanner will lock after startup.
When 'Enabled', the scanner will lock when the scanner operator panel
timeout expires.
Scanner locking and unlocking can be done from any host (worksta-
tion) or a single host (workstation) only on the network.
When set to 'From any host', accounting fields can be filled in from any
host to unlock the scanner.
When set to 'From single host', a single host can be specified from
which the scanner can be unlocked.
Chapter 3 - Define your workflow with Océ Express WebTools
The Scanner accounting tab
4
63