Table of Contents
Advertisement
How to set the media separation method
Introduction
When you connect the Océ Double Decker Pro to the printer, you can define the separa-
tion settings in Océ Express WebTools .
Note:
For more information on how to enable media separation and how to copy with a sepa-
ration sheet, see
sheet preferences' on page
Set the media separation settings
To define the settings:
Open Océ Express WebTools on the controller or any other workstation and log in as
1.
'Key operator' or 'Power user'.
Click on the 'Preferences' - 'System settings' tab, and go to "Separation Sheet".
2.
Click "Edit" in the settings group bar or click on the value of a single setting.
3.
Enter your preferred settings.
4.
Click "OK" to confirm you entries or "Cancel" to reject your entries.
5.
Result
The printer will print with the selected separation method. Your output is delivered on
the Océ Double Decker Pro.
'How to set the media separation method' on page
111,
'Copy with a separation sheet' on page
How to set the media separation method
261,
'Define the separation
Chapter 10 - Océ Double Decker Pro
221.
261
Advertisement
Table of Contents
