How To Clear A Media Jam In The Paper Roll Compartment - Oce PlotWave 900 User Manual

How to clear a media jam in the paper roll compartment

Remove a media jam in the paper roll compartment
Note:
Make sure that all the problems in the fuser section have been corrected before correcting
the problem in the roll feed section.
Completely open the correct paper roll compartment.
1.
[217] Open the paper roll compartment
Remove any jammed paper:
2.
• Behind the chip tray
• Underneath the plate
• Underneath the roll 2, the roll 4 or the roll 6 feed plate
Reload the roll if necessary.
3.
Close the paper roll compartment.
4.
How to clear a media jam in the paper roll compartment
Chapter 12 - Solve problems 303