Introduction to reinforcement unit maintenance
Note:
To avoid damage to the reinforcement unit, use only the original reinforcement strips
from Océ.
Maintenance of the reinforcement unit
This section covers maintenance activities for the optional reinforcement unit of the
folder.
The following actions will be described.
•
Insert a new tape roll. See
•
Empty the waste box. See
•
Clean the reinforcement knives. See
Introduction to reinforcement unit maintenance
'Insert a new tape roll' on page
'Empty the waste box' on page
'Clean the reinforcement knives' on page
Chapter 11 - System maintenance
278.
286.
288.
277