How To Set Up A Roll Media Job In Productionhouse - Oce Arizona 200 GT User Manual

How to Set Up a Roll Media Job in ProductionHouse

Introduction
Print jobs can be specified as either a roll job (Roll) or a flatbed (Sheet) job in
ProductionHouse. The specification of either type of job can also be changed after
the print job is transferred to the printer in the Print Jobs module.
Purpose
The operator can choose the type of desired print job and also put a hold on it so it
will not print automatically.
Set up the Roll Job Option in ProductionHouse
When you set the page size for your print job, click on Type: Roll to make it a roll
media option job.
[68]
[68] Onyx Page Size - Roll Option
Set a Hold on a Roll Job
To ensure that your roll media print job is held and not automatically printed, click
on the box in front of "Hold for printer operator" when you set the print options in
ProductionHouse.
Note: If you don't set a hold in ProductionHouse, it is also possible to disable the
Roll media print queue at the printer. To do this click on the Roll icon in the command
toolbar of the Print Job module so that it become dim (grayed out). This will stop
any roll media jobs from automatically printing.
How to Set Up a Roll Media Job in ProductionHouse
119