Table of Contents
Advertisement
#
Settings group
'Service'
'Contact'
'Regional settings'
'Current date and time'
'Print queue management'
'Smart Inbox management'
'Logging and accounting'
'System properties'
'Separation sheet'
'Printer properties'
'Folder properties'
Description
Contact information for service.
Person to contact in case of error.
The regional settings are configured during the
installation of your system. Here you can change
the initial configuration.
Define the time zone, date and time of the system.
Define how jobs are managed in the print queue.
Define how jobs are managed in the Smart Inbox-
es.
Define logging and accounting data.
Define when the system is turned on or off.
Define whether a separation sheet is used after
each job or set
Define the general printer behavior.
Define the general folder behavior. Only available
if a folder is installed.
Chapter 3 - Define your workflow with Océ Express WebTools
Define the system preferences
Note:
Only oceservice can login and edit these
settings.
Note:
You can toggle between the 'First lan-
guage' and the 'Second language' on the
printer or scanner operator panel.
Note:
Every time you change the 'Measurement
unit', the controller recalculates the values
from millimeter to inches and vice versa.
If you reverse to the original value of this
setting a slight calculation difference can
occur due to rounding differences.
95
Advertisement
Table of Contents
