Change the operator panel language
Change the operator panel language
Introduction
It is possible to change the operator panel language. You can choose between two preferred
languages. Define the first and second language in the Océ Express WebTools. See
the regional settings' on page
How to select a language
Open the 'Preference' card in the 'Original' section.
1.
Press the "Language" function key to set the needed language.
2.
Press the 'Preference' section key again to activate the selection.
3.
154
Chapter 5 - Use the Océ PlotWave 900 scanner to copy
84. The Océ PlotWave 900 supports a total of 20 languages.
'Change