Table of Contents
Advertisement
Interrupt a job
Interrupt a job
Introduction
Press the Job interrupt key on the scanner operator panel to give extra priority to a copy
job. When you press the Job interrupt key, your copy job will be placed at the top of the
printing queue. When you select Job interrupt, a message appears on the scanner panel
display.
The print process will be interrupted after the current page is printed. The transport of
originals on the scanner will not be interrupted.
How to interrupt a job
Press the Job interrupt key on the scanner operator panel. The printer interrupts the active
1.
job and stops after the current page is printed.
The Jobs - Queue displays the interrupt job in the print queue at the active job position.
Make copies (see
2.
Press the Job interrupt key again to do another interrupt job.
3.
Press the Exit interrupt button at the Jobs - Queue to continue with the interrupted job
and collect the output at a later time. Collect the output and press the Exit interrupt
button at the Jobs - Queue to continue with the interrupted job.
194
Chapter 6 - Use the Océ TDS600 scanner to copy
'Make copies' on page
158).
Advertisement
Table of Contents
