Add Toner - Oce PlotWave 900 User Manual

Add toner

Introduction
If the printer has run out of toner, the display shows: "Toner empty". You can add toner
even while you print a job. You can finish your current job.
How to add toner
Caution:
Only use Océ PlotWave 900 toner. Make sure you have the correct region version.
Caution:
You can only add one bottle of toner. If you add more than one bottle, the developing
unit will flood.
Caution:
The printer must be turned on to add the toner.
Caution:
Shake the bottle with the toner well.
Open the front top cover.
1.
Put the toner bottle in the refill opening.
2.
Pull the slide to the right.
3.
The toner bottle starts to shake. The toner will flow from the bottle into developing unit.
Wait until the toner bottle stops shaking, then push the slide to the left.
4.
Remove the toner bottle.
5.
Chapter 11 - System maintenance
Add toner
271