Select The Input Mode - Oce PlotWave 900 User Manual

Select the input mode

Select the input mode
Introduction
You can use the 'Input mode' setting to specify how a job will be sorted: the 'Single sheet'
option treats each sheet as a separate job. "Multiple sheets" produces the specified number
of copies for each sheet in a job and then continues with the next sheet. Graphically that
would look something like this:
1 1 1
[121]
You can use the 'Input mode' setting to specify how a job will be sorted: the 'Single sheet'
option treats each sheet as a separate job. "Multiple sheets" produces the specified number
of copies for each sheet in a job and then continues with the next sheet. Graphically this
looks as follows:
1 1 1
[122] The principle of 'Multiple sheets'
'Set' produces one copy for each sheet in a set and then continues with the next copy of
the entire set, as follows:
1 2 3
[123] The principle of set copy
The current input mode can be closed by pressing the Stop key.
The currently selected input mode is indicated by the 'o' symbol.
Select the input mode
Select a template.
1.
Select the "Feeding" card in the "Original" section.
2.
Select the desired media with the "Input mode" function key.
3.
[124] Select the input mode
184 Chapter 6 - Use the Océ TDS600 scanner to copy
2 2 2 3 3 3
2 2 2 3 3 3
1 2 3 1 2 3
4 4 4
4 4 4
1 2 3