Table of Contents
Advertisement
Num-
Name
ber
5
Manual feed key
6
Auto roll key
7
Correction key
8
Numeric keys
9
Function keys
10
Numeric display
11 /
Start key
B
Description
If you want to copy onto a material type or size
that is not available in one of the roll compart-
ments, press the manual feed key. The key is locat-
ed on the right section of the operator panel.
If you select auto roll, the Océ PlotWave 900 will
try to use a roll format that matches the original
size. After inserting the original, the roll that is
used is indicated on the operator panel. When
auto roll is selected, the Océ PlotWave 900 will
look for a matching roll of the 'Standard' copy
material. If such a roll is not found, it will try to
find a matching roll of another type of material.
The key operator can define the 'Standard' copy
material. When automatic zoom is selected on the
operator panel display, together with auto roll, the
size of the matching roll does not necessarily have
to be the same as the size of the original.
The orange key marked with C is located at the
bottom of the central section of the operator panel.
Press the Correction key one time to reset the se-
lected setting to its default value. Press the Correc-
tion key two times to reset the numeric display to
'1'. Press the Correction key three times to return
to the first screen on the display.
The keys with numbers on the lower part of the
middle operator panel are used to specify numbers.
Values you can set with the numeric keys include:
the number of copies or sets up to a maximum of
999, zoom factor, user id, and account id.
Displays the number of sets or copies, set with the
numeric keys.
Use the green Start key to start the feeding of the
original, to restart the scan process, or for other
purposes such as to mark the end of a set.
Chapter 5 - Use the Océ PlotWave 900 scanner to copy
Scanner operator panel
145
Advertisement
Table of Contents
