Table of Contents
Advertisement
Stamping
Stamping
Introduction
Stamping is an Océ PlotWave 900 option that allows you to print a predefined text on
all your copies. The key operator can predefine a maximum of 50 stamps in the Océ Ex-
press WebTools.
You can select one stamp per original and you can select a color, font size or position. A
stamp can consist of the following parts:
•
predefined text
•
date
•
time
How to select a stamp
Open the 'Stamping' card in the 'Print' section.
1.
Select stamp 'On' with the 'Enable' function key.
2.
Select a stamp with the 'Select stamp' function key.
3.
Note:
The following steps are optional.
Select a color with the 'Format stamp' function key and the arrow keys.
4.
Select a "Size" with the "Format stamp" function key and the arrow keys.
5.
Select a position with the 'Stamp position' function key and the arrow keys.
6.
196
Chapter 6 - Use the Océ TDS600 scanner to copy
Advertisement
Table of Contents
