Table of Contents
Advertisement
Replace/Load a roll of media
Use both hands to put the holder in the paper roll compartment. First, position the left-
4.
hand side of the holder in its notch, then position the right-hand side in its notch.
[179] Put the roll into the paper roll compartment
If the new roll does not have a straight leading strip you can cut it manually.
5.
Press the correct button inside the paper roll compartment and feed the paper between
6.
the input guide plates as indicated by the arrow. The material is fed into the machine.
Note:
Also see the stickers inside the roll compartments on how to feed paper.
[180] Button to feed the media
Close the paper roll compartment. The material is cut. The size of material is indicated
7.
on the operator panel.
Define the media type: See
8.
266
Chapter 11 - System maintenance
'Preferred Océ media types and sizes' on page
374.
Advertisement
Table of Contents
