Table of Contents
Advertisement
Define a scan-to-file template
Note:
The different settings under the headers 'Template 3: Custom setting 1' - 5, 'Template
3: Original - Feeding', 'Template 3: Original - Sheet', 'Template 3: Original - Image',
'Template 3: Print and File - Image', and 'Template 3: Print - Layout' can be edited,
but are not mandatory for a basic scan-to-file template. If you want to define your settings
in more detail, you can edit these settings.
How to define the "Template: File" preferences
1. Click 'Preferences'. Choose your template, for example template 3, and go to the
'Template 3: File' bar.
Template 1: File
Setting
'Destination'
'Resolution (dpi)'
'File type'
'Compression for TIFF'
'File organization for TIFF'
'Compression for PDF'
'Compression for PDF/A'
104
Chapter 3 - Define your workflow with Océ Express WebTools
#
Description
'The destination to put the scans into.'
You can choose between different scan
destinations.
These destinations can be predefined un-
der the 'Configuration' - 'Scan destina-
tions' tab.
For more information on how to do this,
see
'Configure scan destinations' on page
86,
'Configure a local scan destination' on
page
88,
'Configure a remote scan destina-
tion' on page
89.
'The resolution of the scanned image in
dpi.' You can choose between 200, 300,
and 400 dpi.
'The file type of the scanned image.' You
can choose between different types.
'The compression method when scanning
to TIFF.'
'The file organization when scanning to
TIFF.'
'The compression method when scanning
to PDF.'
'The compression method when scanning
to PDF/A.'
Advertisement
Table of Contents
