Table of Contents
Advertisement
Sections on the display of the scanner operator panel
Sections on the display of the scanner operator panel
Introduction
When the job templates are enabled, the scanner operator panel displays the templates.
You need to select a template before the sections will display.
[93] The job templates at the bottom of the scanner operator panel
When you select a job template (or when the job templates are disabled) the scanner op-
erator panel displays the following sections with an active 'Custom' section.
•
The 'Custom' section, which provides direct access to frequently used settings as defined
by the key operator.
•
The 'Original' section, which provides access to the settings of the scanner input, the
original.
•
The 'Print' section, which provides access to the settings of the printer output, the
print.
•
The 'File' section, which provides access to the settings of the scan-to-file output, the
file.
Custom section
The 'Custom' section contains the frequently used settings. The figure below shows an
example for users that often use the scan-to-file-option.
[94] Example 'Custom' section (scan-to-file)
The key operator defines the content of the Océ Express WebTools. The figure below
shows an example of a custom section for users that often use different kinds of finishing.
150
Chapter 5 - Use the Océ PlotWave 900 scanner to copy
Advertisement
Table of Contents
