Check Or Adapt The Network Settings - Oce PlotWave 900 User Manual

Check or adapt the network settings

Check or adapt the network settings
Introduction
The 'Network settings' can be adapted in the Océ Express WebTools or on the printer
operator panel.
Caution:
Detailed network knowledge is needed to change the network settings.
Network settings in Océ Express WebTools
See: 'Configure the network settings in Océ Express WebTools' on page 49
1.
Network settings on the printer operator panel
Press the 'Online' key on the printer operator panel to put the printer offline. The message
1.
'Offline' is displayed in the status window.
Press the left selection key to shift the focus to the network settings option. A shadow
2.
effect is used to indicate that the focus is set to this option.
View or adapt the network settings.
3.
Put the printer online again by pressing the "Online" key.
4.
Reboot the Océ PlotWave 900 controller.
5.
360 Chapter 17 - Network and Security settings