Table of Contents
Advertisement
Auto align
Note:
If you select 'Middle', make sure the original width is properly specified as described in
the section about
•
'Standard' if a standard sized original is used
•
The exact original width (numeric) if a non-standard sized original is used.
Feed your original.
3.
Note:
With 'Synchro cut' the system cuts at the measured length of the original times the zoom
factor. The minimum length is 279 mm or 11 inches. No information loss occurs when
'Synchro cut' is used.
[160] Auto shift options with synchro cut option active
In
'Shift the image' on page
image on the page.
236
Chapter 8 - Special copy and scan jobs
'The scan width' on page
237, you can read how to define the exact location of your
227:
Advertisement
Table of Contents
