Table of Contents
Advertisement
'Template 3: General'
Setting
'Name'
'Description'
'Number of copies'
'Print (copy)'
'File (scan-to-file)'
'Media source'
'Media source when custom roll'
'Media source is manual feed'
2. Click "Edit" in the settings group bar or click on the value of a single setting.
3. Click 'OK' to confirm your entries or 'Cancel' to reject your entries.
#
Chapter 3 - Define your workflow with Océ Express WebTools
Define a scan-to-file template
Description
'The name of this template on the scanner
panel.' You could name the template:
"Scan-to-file".
'The description of this template on the
scanner panel.' Not mandatory.
Only applicable for copying.
To create a scan-to-file template, the
'Print (copy)' can be set to "Off" or "On".
To create a scan-to-file template, the 'File
(scan-to-file)' must be set to "On".
Note:
When 'Print (copy)' and 'File
(scan-to-file)' are both "On", a
scan-to-file with check plot will
be made.
Note:
When 'Print (copy)' is "On" and
'File (scan-to-file)' is "Off", scan-
to-file is impossible and only a
copy will be made.
Only applicable for copying.
Only applicable for copying.
'The printer will request to insert a sheet
in the media bypass (manual feed). Only
portrait size is supported.'
103
Advertisement
Table of Contents
