Table of Contents
Advertisement
Configure the Océ Express WebTools settings for a mobile connection
Configure the Océ Express WebTools settings for a mobile
connection
Introduction
If you want to give users easy access to Océ Mobile WebTools, the settings must first be
configured. With the information, you can develop a 'Quick Response Card' to create
easy access.
Before you begin
Make sure you configure your Wi-Fi network and connect the printer to the network.
Note:
Log in as 'Key operator' or 'Power user' to be able to configure the mobile connection
information.
Illustration
Define the settings for a connection to Océ Mobile WebTools
Open Océ Express WebTools on your workstation.
1.
Go to the 'Configuration' - 'Connectivity' tab.
2.
Go down to the 'Mobile' section.
3.
Click 'Edit' in the right-hand corner.
4.
Enter the settings for the mobile connection. This information will also be printed on
5.
the 'Quick Response Card':
Note:
Enter information according to your IT policy. Contact your 'System administrator' for
more information.
200
Chapter 7 - Use Océ Mobile Printing and Scanning
Advertisement
Table of Contents
