Table of Contents
Advertisement
Press the green knob inside the roll holder to release the locking mechanism and remove
3.
the core from the holder.
[177] Remove the core from the holder
How to load a new media roll
Place the new roll in the groove on the manual feed of the printer.
1.
Press the locking mechanism down and slide the roll holder from the left into the core
2.
of the new roll.
Position the roll between the correct format indicators and release the locking mechanism.
3.
[178] Place the new roll on the roll holder
Replace/Load a roll of media
Chapter 11 - System maintenance
265
Advertisement
Table of Contents
