Table of Contents
Advertisement
Media types, material and sizes on the printer
Press the left selection key to shift the focus to the Media option. A shadow effect is used
2.
to indicate that the focus is set to this option.
Use the arrow keys to select the roll for which you have just loaded new media.
3.
Press the right selection key to activate the 'Mat.' (Material) option. The dotted line
4.
around the current selection changes into a solid line and the small selection triangles
next to the specified size are no longer dimmed.
Use the arrow keys to select the media material for the media you just loaded.
5.
Press the "Online" key to put the printer online again. The printer now knows which
6.
media is used for the specified roll.
Set a media size indication
Press the "Online" key on the printer operator panel to put the printer offline. The message
1.
"Offline" is displayed in the status window.
Press the left selection key to shift the focus to the Media option. A shadow effect is used
2.
to indicate that the focus is set to this option.
Use the arrow keys to select the roll for which you have just loaded new media.
3.
Press the right selection key to activate the 'Size' option. The dotted line around the
4.
current selection changes into a solid line and the small selection triangles next to the
specified type are no longer dimmed.
Use the arrow keys to select the 'Size' option for the specified roll. The printer shows
5.
both DIN and ANSI sizes.
Press the "Online" key to put the printer online again. The printer now knows the size
6.
of the specified roll.
38
Chapter 2 - Get to know the Océ PlotWave 900 system
Advertisement
Table of Contents
