Brightness
Brightness
Introduction
You can change the brightness of a print or copy by modifying the exposure of the scanner.
The exposure can be set to lighter and darker.
Set the exposure
Press the 'Exposure' function key and use the arrow keys to set the exposure as desired.
1.
The up and down arrow keys can be used to gradually increase or decrease the exposure
setting. The left or right arrow keys can be used to go to the highest or lowest available
exposure level at once.
If you want to go from any negative value to the highest possible positive value, or vice
versa, you have to press the appropriate left or right key twice.
232
Chapter 8 - Special copy and scan jobs